105
INSTALLER SETTING
ENGLISH
Value Mode
Not use (Default) -
Use
Step 0
Step 1
Step 2
Smart Grid(SG)
It is the function to enable / disable the SG Ready function and to set the reference value at SG2
step.
• In the installer setting list, select Smart Grid(SG) category, and press [OK] button to move to
the detail screen.
OK
104
INSTALLER SETTING
Pump frequency setting (RPM)
It is a function to enable installer to control pump RPM of BLDC pump application model.
• In the installer setting list, select Pump frequency setting(RPM) category, and press [OK] button
to move to the detail screen.
• The function is not available for some products.
OK
Value Description
3 500
500~3 700 : RPM
Change unit : 10
To Next Page
Loading...
