Category Level1 Level2 Level3 DESCRIPTION
Timer
Setting current time - - You can set current time.
Daily timer
On timer -
You can turn on the air conditioner at certain times of the day.
- It is executed only once and is deactivated.
Off timer -
You can turn off air conditioning at certain times of the day.
- It is executed only once and is deactivated.
Sleep timer - - After 1 to 7 hours of operation, the product can be turned off.
Wi-Fi Wi-Fi pairing - -
Enables the AP mode function of the Wi-Fi module connected to the indoor
unit.
Installer setting
Mode override code : 0
Set to master (00)
Set to slave (01)
The operation master / slave selection function is to avoid other mode opera-
tions.
It prevent the selection of opposite mode of the master indoor unit by the
indoor units set as slaves.
Ceiling height code : 1
Standard (11)
Low (12)
High (13)
Very high (14)
It is a function to change the indoor fan air volume according to the ceiling
height.
Group control code : 2
Set to master (20)
Set to slave (21)
Check master/slave (22)
It is the function to set the fan speed value corresponding to each fan speed
for easy installation
Auxiliary heater code : 2
Set to auxiliary heater (23)
Cancel auxiliary heater (24)
Check auxiliary heater
installation (25)
-
To Next Page
Loading...
Need help?
General
