LG PQWRHSF0 - Installation Method; Mounting the Remote Holder; Inserting Batteries into Remote

Insert Pull
Wall
Installation Method
Owner’s & Installation Manual 7
ENGLISH
How to mount on a wall
How to insert batteries
Installation Method
To insert the remote control to the holder.
Use the screws to secure the holder to the wall or attach the holder side of indoor unit.
1
2
1. Remove the cover from the back of the
remote controller.
• Slide the cover according to the arrow
direction.
2. Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
• Slide the cover into back position.
• Do not use
rechargeable batteries
such batteries are
different from standard
dry cells in shape,
dimensions, and
performance.
• Change the batteries
with a new one if the
remote control does not
work properly after
using for an extended
length of time.