LG ProBeam - Page 151

18
ENGLISH
16. [Energy Saving] (Command: j q)
ʢ Sets the energy saving mode.
You can also adjust [Energy Saving] in the [Picture] menu.
Transmission (j)(q)( )(Set ID)( )(Data)(Cr)
Data
01: [Minimum] 02: [Medium]
03: [Maximum]
Ack (q)( )(Set ID)( )(OK/NG)(Data)(x)
17. Key (Command: m c)
ʢ To send IR remote key code.
Transmission (m)(c)( )(Set ID)( )(Data)(Cr)
Data: “KEY CODES” on page 2.
Ack (c)( )(Set ID)( )(OK/NG)(Data)(x)
18. Input select (Command: x b) (Main Picture Input)
ʢ To select input source for main picture.
Transmission (x)(b)( )(Set ID)( )(Data)(Cr)
Data
90: [HDMI1] 91: [HDMI2]
92: [HDBaseT]
Ack (b)( )(Set ID)( )(OK/NG)(Data)(x)
* This function depends on model and signal.