To Next PageTo Next Page
Need help?Do you have a question about the LG PW800 and is the answer not in the manual?
General| Native aspect ratio | 16:9 |
|---|---|
| Projection distance | - m |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (dynamic) | 100000:1 |
| Contrast ratio (typical) | - |
| Screen size compatibility | 25 - 100 \ |
| Projector native resolution | WXGA (1280x800) |
| Focal length range | - mm |
| Light source type | LED |
| Service life of light source | 30000 h |
| 3D | Yes |
| Full HD | No |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 0 |
| Noise level | - dB |
| RMS rated power | 2 W |
| Number of built-in speakers | 2 |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Portable |
| Power source | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 65 W |
Weight and Dimensions| Width | 139.7 mm |
|---|---|
| Height | 50.8 mm |
| Weight | 589.67 g |
| Package depth | 170.18 mm |
| Package width | 259.08 mm |
| Package height | 190.5 mm |
| Package weight | 1814.36 g |
Details chassis and model numbers for the DLP projector.
Provides a critical caution notice for servicing the projector.
Highlights critical safety characteristics of internal parts and replacement guidelines.
Provides guidance on using isolation transformers, fuses, and wire management.
Explains procedures for checking AC leakage current (cold and hot) for safety.
Defines the projector's application scope and requirements for testing procedures.
Details key specifications like video input, power, picture size, and environmental conditions.
Covers adjustment mode entry, notes, and initial steps for lighting system adjustments.
Details adjustments for illuminator phenomena and final lighting system configuration.
Procedures for inspecting lighting margins, focus, and verifying stopper location.
Instructions for verifying the DMD light source performance.
Guidelines for preventing ESD damage and proper cleaning of the DMD.
Specific steps for configuring country group and Wi-Fi country settings by model.
Method for performing EDID data download and checking the DPP version.
Steps to enter the 'Power Only' mode for assembly line adjustments.
Covers necessary preparations and the step-by-step method for keystone adjustment.
A checklist to confirm correct system settings like Wi-Fi, HDCP2, and EDID.
Details the equipment required and the step-by-step process for CCA adjustment.
Outlines brightness inspection steps and how to perform a joystick test.
Verifies keystone value and checks reference data like EDID and country group.
Identifies symptoms related to improperly connected internal connectors.
Further information on symptoms caused by faulty connector connections.
A visual flowchart to guide diagnosis and resolution of projector problems.
