11
Setting the Clock
1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press
ON UNIT
1/]
CLOCK
./>
SET
./>
SET
./>
SET
Use your player as an alarm clock
1 Turn the power on.
2 Press and hold TIMER. Each function, EX) TUNER, CD.... flashes.
3 Press SET when the function you want to be woken by is showing.
4 Choose one of them by pressing SET.
5 “ON TIME” will be displayed. Then you can set the time you want the alarm to
go on. Press ./> to change the hours and minutes and SET to save.
6 “OFF TIME” will be displayed. Then, you can set the time you want the function to
stop. Press ./> to change the hours and minutes and press SET to save.
7 You will be shown the volume (VOL) you want to be woken by.
Use ./> to change the volume and SET to save.
The clock icon “
”shows that the alarm is set.
8 Press TIMER button 2times. You can check the setting status.
Notes:
- If you set the clock time, you can check the time by pressing CLOCK even
when the player is turned off.
- If you set the clock time and alarm, you can check the alarm icon “
” by
pressing CLOCK even when the player is turned off.
Fall asleep while listening to your player
1 Press SLEEP repeatedly to select delay time between 10 and 180 minutes,
after the unit will be turned off.
2 To check the remaining time, press SLEEP.
DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned
off and the display window will be darken by half. To cancel it, press SLEEP
repeatly until dim off.
RAD114-A0U-DNGAFLK-ENG.indd 11RAD114-A0U-DNGAFLK-ENG.indd 11 2010.4.5 3:24:26 PM2010.4.5 3:24:26 PM
To Next Page
Loading...
Need help?
General
