7
Listening to CDs
Listening to CDs - More you can do
Pausing or restarting a CD
1 Press
B
/
[]
during playback.
2 Press this button again to resume play.
Searching for a section within a track
Hold ./>
on the unit or ./>
on the remote control
during playback
and release it at the point you want to listen to.
Skipping to another track (files)
Press ./>
on the unit or ./>
on the remote control in stop status.
Program list
You can play up to 20 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press
PROGRAM/MEMO.
on the remote control
in stop status.
3 Press
./>
on the unit
or
./>
on the remote control
to select a
track.
4 Press
PROGRAM/MEMO. again to save and select a next track.
5 Press
B
/
[]
to play the programmed music files
.
6 To clear your selection, press x , PROGRAM/MEMO. and then x .
Listening to your tracks (files) repeatedly or randomly
1 Press REPEAT/RANDOM repeatedly. The current (tracks) file will be played
back repeatedly or randomly.
2 To return to normal playback, press REPEAT/RANDOM repeatedly to select
[Off].
Audio CD and MP3/ WMA CD can be played back in this unit.
1. Open the CD door
2. Insert the CD: Label facing up.
3. Close the CD door
4. Select the CD function: The display
will show the total number of tracks
(files).
5. Start the CD playing
6. To stop a CD playing
Z OPEN/CLOSE
-
Z OPEN/CLOSE
FUNCTION
B
/
[]
x
-
-
-
FUNCTION
B
/
[]
x
Listening to the radio - More you can do
Looking for radio stations automatically
1 Press and hold TUNING + / TUNING - on the unit or TUN.- / TUN.+ on the
remote control
for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROGRAM/MEMO. on the
remote control
for two seconds.
“ERASE ALL” shows.
2 Press PROGRAM/MEMO. on the
remote control
to erase all the saved
stations.
Improveing poor FM reception
Press
B
/
[]
on the remote control. This will change the tuner from stereo to mono
and usually improve the reception.
Listening to the radio
Make sure both the FM and AM (optional) aerials are connected.
1. Select either FM or AM (optional)
2. Select the radio station
3. To ‘save’ a radio station: A preset
number will show in the display.
4. Select the preset number
5. To confirm press: Up to 50 radio
stations can be saved.
6. To select a ‘saved’ station
ON UNIT
FUNCTION
TUNING (+)/ (-)
-
-
-
-
ON REMOTE
FUNCTION
TUN.- / TUN.+
PROGRAM/MEMO.
FOLDER•PRESET
PROGRAM/MEMO.
FOLDER•PRESET
ON UNIT ON REMOTE
RAD114-A0U-DNGAFLK-ENG.indd 7RAD114-A0U-DNGAFLK-ENG.indd 7 2010.4.5 3:24:25 PM2010.4.5 3:24:25 PM
To Next Page
Loading...
Need help?
General
