LG RM1 User Manual

2 Connecting
Connecting 9
Connecting
2
Use of Tripod
You can mount the unit on a tripod.
The tripod is an optional purchase.
y
Extend the tripod legs as much as possible
and tighten up the screw securely.
y
Before connecting with the unit, you must set
up the tripod completely to prevent shaking.
>
Caution
1. Unfold the tripod on a flat surface. And then fix
the tripod.
Tighten up the tightening part of the tripod.
2. Lift the speaker and connect the tripod to fixing
part on the bottom of the speaker.
Insert the safety pin when setting up the tripod
stand.
>
Caution
3. Loosen the Hand screw on the bottom of the unit
fully, then tighten it up.
Tighten up the Hand screw on the bottom of the
unit while the other is holding the speaker and
tripod.
>
Caution

LG RM1 Specifications

General

Woofer	Yes
Speaker type	1-way
Woofer diameter	20.32 mm
Number of drivers	-
Speaker placement	Floor, Stand-mountable
Audio output channels	1.0 channels
Number of woofer drivers	1
Woofer diameter (imperial)	8 \
Impedance	4 Ω
Sensitivity	101 dB
RMS rated power	- W
Product color	Black
Volume control	Rotary
Recommended usage	DJ
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
AC input voltage	110 - 240 V
Power source type	AC
Power consumption (standby)	0.5 W
Power consumption (typical)	15 W
Package type	Box
Package depth	302 mm
Package width	327 mm
Package height	440 mm
Package weight	5500 g
Quantity per pack	4 pc(s)

Weight and Dimensions

Depth	250 mm
Width	255 mm
Height	380 mm
Weight	4000 g