EasyManuals Logo

LG RM2 User Manual

LG RM2
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Connecting10
Connecting
2
y
If you use a tripod, use the tripod only for
speaker.
y
Before buying a tripod, check the
specications for maximum bearing load of
the center column.
(Unit’s net weight : about 12.3 kg)
(B)
(A)
35 mm
y
Use tripod as below :
(A) From tripod’s center to tripod’s leg :
above 600 mm.
(B) From top of tripod to bottom of tripod :
below 900 mm.
(C) Tripod net weight : over 3.9 kg
y
For safe use set the tripod as low as
possible.
y
You should pull the center column to the
maximum only in case of need.
y
Mount only one unit on each tripod.
y
Do not try to extent the tripod legs beyond
it’s allowed range.
y
Make sure the tripod is correctly assembled
and all its components are tightly
connected.
y
Do not try to assemble the tripod if parts
are missing or defective.
y
After installation, make sure the unit is set
up rmly on the tripod.
y
Do not place the unit on anything unstable
where it might accidentally fall over.
y
Add weight such as sand bags around the
tripod legs to prevent the tripod from falling
over.
,
Note
y
You should limit people around the unit
while its on a tripod. Otherwise it may result
in an accident and may cause personal injury
and/or property damage.
y
Standing on the stool to reach unit’s control
panel is risky and might lead to injuries.
y
Do not put or attach other objects on the
tripod.
y
Do not shake or push the unit when the
tripod is installed.
y
Refrain from moving around the tripod after
unit is installed.
y
Remove all connected cables to the unit
on the tripod before moving the tripod or
adjusting its height.
y
When transporting or moving the unit,
always use two or more people.
y
When you use the tripod, use an extension
cord. Always be careful with the movement
of the cable.
y
It is prohibited to use this unit outside.
(Indoor use only)
y
Do not expose the unit to excessive dust,
vibrations, extreme cold or heat (such as in
direct sunlight or near a heater) to prevent
the possible disgurement of the panel or
damage to the internal components.
y
When using the external input cable (Mic,
etc.) after installing the unit on the tripod,
external input cable can cause the unit to
fall down.
y
Watch out because people can trip over the
input cable (Mic, etc.) connected the unit.
y
Always be careful not to trip over the unit.
,
Note

Other manuals for LG RM2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG RM2 and is the answer not in the manual?

LG RM2 Specifications

General IconGeneral
WooferYes
Speaker type1-way
Number of drivers-
Speaker placementFloor, Stand-mountable
Audio output channels1.0 channels
Impedance3 Ω
Sensitivity102 dB
RMS rated power- W
Product colorBlack
Volume controlRotary
Recommended usageDJ
USB connector typeUSB Type-A
USB 2.0 ports quantity1
Connectivity technologyWired & Wireless
AC input voltage111 - 240 V
Power source typeAC
Power consumption (standby)0.5 W
Power consumption (typical)25 W
Package typeBox
Package depth508 mm
Package width742 mm
Package height402 mm
Package weight14444 g
Weight and Dimensions IconWeight and Dimensions
Depth385 mm
Width430 mm
Height655 mm
Weight12000 g

Related product manuals