LG RM2 User Manual

2 Connecting
Connecting 9
Connecting
2
Use of Tripod
You can mount the unit on a tripod.
The tripod is an optional purchase.
y
Extend the tripod legs as much as possible
and tighten up the screw securely.
y
Before connecting with the unit, you must set
up the tripod completely to prevent shaking.
>
Caution
1. Unfold the tripod on a flat surface. And then fix
the tripod.
Tighten up the tightening part of the tripod.
2. Lift the speaker and connect the tripod to fixing
part on the bottom of the speaker.
Insert the safety pin when setting up the tripod
stand.
>
Caution
3. Loosen the Hand screw on the bottom of the unit
fully, then tighten it up.
Tighten up the Hand screw on the bottom of the
unit while the other is holding the speaker and
tripod.
>
Caution

LG RM2 Specifications

General

Woofer	Yes
Speaker type	1-way
Number of drivers	-
Speaker placement	Floor, Stand-mountable
Audio output channels	1.0 channels
Impedance	3 Ω
Sensitivity	102 dB
RMS rated power	- W
Product color	Black
Volume control	Rotary
Recommended usage	DJ
USB connector type	USB Type-A
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
AC input voltage	111 - 240 V
Power source type	AC
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W
Package type	Box
Package depth	508 mm
Package width	742 mm
Package height	402 mm
Package weight	14444 g

Weight and Dimensions

Depth	385 mm
Width	430 mm
Height	655 mm
Weight	12000 g