Operating Instructions
Energy-saving cooling mode can save energy in cooling , because it can operate eciently by setting
body-adaptation time according to the change of time and temperature and
adjusting automatically desired
1. Press the START/STOP BUTTON to start the unit.
2. Open the door on the remote controller.
Select cooling operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODEL BUTTON again and unit will operate in previous
mode(Cooling or healty dehumidication mode).
1. Time can be set only when you press the RESET BUTTON. Having replacing the batteries,
you should press the RESET BUTTON to reset the time. Press the Start/Stop button.
2. Press 2nd F button and check if icon is on.
3. Press the TIME SETTING BUTTONS until the desired time is set.
4. Press the TIME SET/CANCEL BUTTON.
Check the indicator for A.M. and P.M.
temperature.
12 Air Conditioner
Energy-Saving Cooling Mode
Setting the Current Time
PLASMA Purication & Ion Generation Operation
PLASMA
Plasma lter is a technology developed by LG to get rid of microscopic
contaminants in the intake air by generating a plasma of high charge electrons.
This plasma kills and destroys the contaminants completely to provide clean and
hygienic air.
Plasma purication and Ion generation can be started by pressing the PLASMA BUTTON
on the remote controller. Repressing it will deactivate the operation.
This feature can be used in any operation mode and any fan speed can be used while
Plasma purication and Ion generation features can not be operating separately.
plasma lter is functioning.
NOTE
To Next Page
Loading...
Need help?
General
