To Next Page

To Previous Page

Operating Instructions

1. Press the Start/Stop button to start the unit.

2. Press Airow Direction button and the louver will swing

up and down. Press the Airow Direction button again to

sett the vertical louver at the desired airow direction.

Always use the remote control to adjust the

damage the air conditioner.

direction louver will close the air outlet vent of the

The left/right(Horizontal Airow) can be adjusted by using the remote control.

1. Press the Start/Stop button to start the unit.

2. Open the door on the remote control.

Press the Horizontal Airow Direction button

and the louvers will swing left and right.

Press the Horizontal Airow Direction Control Button

again to set the horizontal louver at the desired

airow direction.

system.

NOTICE

Jet cool function can be used to cool the room quickly in hot summer. When this

function is turned on, the air conditioner runs in cooling operation mode with super

high fan speed and 18 °

cooling.

Similarly, jet heat function (available only in some models) warms up the room quickly

by operating at super high fan speed and 30 °C setting temperature for 60 minutes.

You can activate this operation by pressing the JET COOL BUTTON.

To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or

INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.

• Jet cool function cannot be activated during heating or auto changeover operations.

• In case of Inverter, Art Cool and Art Cool Wide(non-Deluxe) model, you can use jet heat function by

pressing JET COOL BUTTON for heating operation.

• Art Cool and Art Cool Wide models close the side discharges during jet cool/heat operation, for strong

cooling and heating.

NOTE

14 Air Conditioner

Vertical Airow Direction Control

Horizontal Airow Direction Control

Jet Cool Operation

LG S10INV-2 User Manual

Questions and Answers: