LG SH2 User Manual

2 Connecting
Connecting
13
Connecting
2
Connecting the
subwoofer
Attaching the subwoofer to the
unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black stripe wire to the terminal
marked - (minus) and the other end to the terminal
(red tube) marked + (plus).
y Do not insert the speaker wire too far into
the connector. Make sure the exposed part of
the wire makes contact with the connection
terminal.
y Use the speaker supplied with this unit only.
Using any other speaker may cause
malfunction.
>
Caution
Connecting to your TV
Using an Optical cable
1. Connect the OPT. IN jack on the back of the unit
to OPTICAL OUT jack on the TV using an Optical
cable.
Optical
cable
2. Select the input source to OPTICAL by pressing
F button repeatedly.
y Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
y You can enjoy the TV audio through the
speakers of this unit. In the case of some TV
models, you must select the external speaker
option from the TV menu. (For details,
reference your TV user manual.)
y Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
y Details of TV setting menu vary depending on
the manufacturer or model of your TV.
,
Note

LG SH2 Specifications

General

Surround Sound	other
Inputs	optical digital audio
Outputs	none
HDMI Inputs	0
HDMI Outputs	0
USB Ports	0
Bluetooth	yes
Wireless Connectivity	bluetooth
Optical Audio Inputs	1
Remote Control	yes

Weight and Dimensions

Depth	3.5 inches
Height	2.4 inches
Width	34.6 inches
Net Weight	4 pounds