Connecting 11
Connecting
2
Wireless connection
Connect the AC power cords of all the systems to a
wall outlet.
When you turn on the player, the wireless
connection will be completed automatically.
LED indicator
LED Color Operation
Blue (Blink)
The connection is not
completed.
Blue The connection is completed.
Red
The connection is in standby
mode or failed.
O
(No display)
The AC power cord is unplugged.
y
If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (wireless subwoofer and main unit)
away from there.
y
It takes a few seconds (and may take longer)
for the player with the built-in wireless
transmitter and wireless subwoofer to
communicate with each other.
y
The available range is 20 m for wireless
connection in an open place.
,
Note
Wireless connection, manually
When the unit is manufactured, the ID is already
set. If interference occurs or you use a new wireless
unit, an ID should be set again.
When the [Wireless Speaker Connection Guide]
appears, press the PAIRING button on the rear of
the wireless subwoofer.
-
If you see the blue LED indicator light on the
wireless subwoofer, the pairing was successful.
Select the [Speaker test] to test the connection.
HLX56S-FN_CANLLK_ENG_4906.indd 11 2011-04-25 �� 12:04:47
To Next Page
Loading...
Need help?
General
