Adjusts the color balance between red and green displayed on the screen. The closer
to Red 50, the redder the color will be. The closer to Green 50, the greener the color
will be.
Color Gamut
Selects the range of Colors to display. Set color gamut to Auto Detect according to
the signal, or to Native to display more vivid and richer color.
Fine Tune
This is used when experts control it by using a test pattern. You can control it by
selecting areas of six colors (Red/Green/Blue/Cyan/Magenta/Yellow).
For normal images, adjustments may not result in noticeable Color changes.
Color Upgrade
To make the image more colorful and lively adjust the Color and saturation of the
picture.
Select Color
From Red/Green/Blue/Cyan/Magenta/Yellow, select a tone to adjust.
Adjust Saturation / Adjust Tint / Adjust Luminance
Adjust the chroma/tint/luminance of the tone in the range of -30 to +30.
White Balance
The function to adjust each color to be reproduced more accurately based on white
allows you to adjust the overall color tone of the screen to your preference.
Color Temperature
You can set the color to make the display look cooler or warmer.
Method
This method is used for fine-tuning the color temperature setting. You can control
the color temperature at two points of the bright part and dark part of the video if you
select 2 Points, at each point of 10 levels if you select 10 Points Signal Level(%),
and at each point of 22 levels of the video if you select 22 Points Signal Level(%).
Point
To Next Page
Loading...
Need help?
General