Select screen brightness for color temperature adjustment.
If Method is set to 2 Points; use Low to select shadows and High to select
highlights.
If Method is set to 10 Points Signal Level(%); you can select brightness using
numbers indicating 10 levels.
When the Method is set to 22 Points Signal Level(%), you can select the
brightness with the 22 levels of brightness.
Signal Level(%)
Select screen brightness for color temperature adjustment.
If Method is set to 10 Points Signal Level(%); you can select brightness using
numbers indicating 10 levels.
When the Method is set to 22 Points Signal Level(%), you can select the
brightness with the 22 levels of brightness.
Show brightness level at the maximum signal level(%)
Adjust the luminance to the highest IRE (100 points).
Adjust brightness level at the selected signal level(%)
You can adjust the selected brightness by points.
You can do these settings only when the Picture Select Mode is the Cinema,
Expert (Bright space, daytime) or the Expert (Dark space, night) and when the
Method is set to 10 Points Signal Level(%) or 22 Points Signal Level(%).
Red / Green / Blue
Adjust the color temperature of the selected point.
Adjust the intensity of Red/Green/Blue in the range of -50 to 50.
You can adjust respective values for the brightness selected in Point.
Depending upon the input signal or the selected picture mode, the available options may
differ.
The configurable items differ depending upon model.
Adjusting the Contrast of a Picture
Picture Advanced Settings Clarity
You can adjust the contrast of a Picture to show it more clearly.
Adjust Sharpness
To Next Page
Loading...
Need help?
General