18 OPERATION
OPERATION
Using the Washer
WARNING
• To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before
operating this appliance.
1
Sort Laundry and Load the Washer
Sort laundry by fabric type, soil level, color and load size, as needed. Open the
door and load items into the washer.
2
Cleaning Products
Add the proper amount of HE (High-Efficiency) detergent to the detergent
dispenser. If desired, add bleach or fabric softener to the appropriate
dispensers.
3
Turn on the Washer
Press the Power button to turn on the washer. The lights above the cycle
buttons will illuminate and a chime will sound.
4
Cycle Buttons
Press the Cycle button until the desired cycle is selected.
5
Adjust Settings
Default settings for the selected cycle can now be changed, if desired, using the
cycle modifier and option buttons.
NOTE
• Not all modifiers and options are available on all cycles. A different chime will
sound and the LED will not come on if the selection is not allowed.
6
Begin Cycle
Press the Start/Pause button to begin the cycle. The washer will agitate briefly
without water to measure the weight of the load. If the Start/Pause button is not
pressed within 60 minutes, the washer will shut off and all settings will be lost.
7
End of Cycle
When the cycle is finished, a melody will sound. Immediately remove your
clothing from the washer to reduce wrinkling. Check around the door seal when
removing the load for small items that may be caught in the seal.
NOTE
• The washer rotates the laundry in a way that allows it to use less water while still fully saturating your clothing.
It is normal to not be able to see water during the wash cycle. If the temperature or the water level inside
the machine is too high, the door locks and cannot be opened. To open the door while washing, use the
Rinse+Spin feature.
To Next Page
Loading...
Need help?
General
