To Next Page

To Previous Page

Getting Started

4. Fix the brackets with screws (A) as shown in the

illustration below.

Screws (A) and Wall Plugs are not supplied for

mounting the unit. We recommend the Hilti

(HUD-1 6 x 30) for the mounting.

Note

5. Put the unit on the brackets to match screw

holes on the bottom of the unit.

6. Fix the unit with the screws firmly.

To detach the unit, perform it in reverse order.

Note

Do not install this unit upside down. It can

damage the parts of this unit or be the cause

of personal injury.

Do not hang onto the installed unit and avoid

any impact to the unit.

Secure the unit rmly to the wall so that it

does not fall off. If the unit falls off, it may

result in an injury or damage to the product.

When the unit is installed on a wall, please

make sure that a child does not pull any of

connecting cables, as it may cause it to fall.

Caution

Other manuals for LG SJ2

Questions and Answers:

Need help?

Do you have a question about the LG SJ2 and is the answer not in the manual?

General