Operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down and prevent sudden increase of sound (Dolby
Digital only). This function turns on or off when you
press DRC ON/OFF.
Turn off the sound temporarily
Press (Mute) to mute your unit. To cancel it,
press
(Mute) again on the remote control or
change the volume level.
Using your TV remote control
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and
mute.
Press and hold DRC ON on the remote control for
about 2 seconds. Then the State LED (White) and
Bluetooth LED (White) blink twice. After that, this
function is enabled.
To turn off this function, press and hold
DRC OFF about 2 seconds. Then the State LED
(White) and Bluetooth LED (White) blink twice.
After that, this function is disabled.
y
Supported TV brands
LG Panasonic Philips Samsung
Sharp Sony Toshiba Vizio
y
Make sure that the sound output of your TV
is set to [External speaker].
y
Depending on the remote control, this
function may not work well.
y
This function does not operate on LG TV's
magic remote control.
,
Note
Auto power down
This unit will turn itself off to save electric
consumption if the main unit is not connected to
an external device and has not been used for 15
minutes.
This unit also turns off after six hours if the Main
unit has been connected to another device using the
analog input. (Ex : Portable, etc..)
To Next Page
Loading...
