Troubleshooting
General
PROBLEM CAUSE & CORRECTION
The unit does not
work properly.
y
Turn off the power of this unit and the connected external device
(TV, Woofer, DVD-player, Amplier, etc.) and turn them on again.
y
Disconnect the power cord of this unit and the connected external device
(TV, Woofer, DVD-player, Amplier, etc.) and then try connecting again.
y
Previous setting may not be saved when device power is shut off.
No Power
y
The power cord is unplugged.
Plug in the power cord.
y
Check whether electricity failed.
Check the condition by operating other electronic devices.
No sound
y
Incorrect input source is selected.
Check the input source and select the correct input source.
y
The mute function is activated.
Press
(Mute) or adjust the volume level to cancel the mute function.
y
When you are using connection with an external device
(set top box, Bluetooth device etc.), adjust volume level of the device.
The remote control
does not work
properly.
y
The remote control is too far from the unit.
Operate the remote control within about 7 m. (23 feet).
y
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y
The batteries in the remote control is exhausted.
Replace the batteries with new one.
The AUTO POWER
function does not
work.
y
Check connection of the external device such as TV, DVD/Blu-Ray player or
Bluetooth device.
y
Depending on the connected device, this function may not operate.
The unit does
not connect with
Bluetooth device
y
Turn off the Bluetooth connection lock function. (Page 21)
To Next Page
Loading...
