LG SK1D User Manual

2 Connecting
Connecting12
Connecting
2
Connecting to your TV
Using an OPTICAL cable
1. Connect the OPTICAL IN jack on the back of the
unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Optical
cable
2. Select the input source to OPTICAL by pressing F
button on the remote control or unit repeatedly.
You can see OPTICAL LED turns on. Then optical
function is selected.
y Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
y You can enjoy the TV audio through the
speakers of this unit. In the case of some TV
models, you must select the external speaker
option from the TV menu. (For details,
reference your TV user manual.)
y Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
y Details of TV setting menu vary depending
on the manufacturers or models of your TV.
,
Note
LG Sound Sync
You can control some functions of this unit by your
TV's remote control with LG Sound Sync.
It is compatible with an LG TV that supports
LG Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV's remote control :
Volume up/down, Mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending on
the capabilities of your equipment.
y You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
According to TV Specications, the volume
and mute of this unit synchronize with TV.
y When the connection fails, make sure of the
condition of the TV and power.
y Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
- The unit is turned off.
- Changing to a different function.
- Disconnecting the optical cable.
- Disconnecting the wireless connection
caused by interference or a distance.
y The amount of time to turn off this unit is
different depending on your TV when you set
AUTO POWER function to ON.
y Details of TV setting menu vary depending on
the models of your TV.
,
Note

LG SK1D Specifications

General

Equalizer	Yes
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	100 W
Audio output channels	2.0 channels
Package depth	170 mm
Package width	1012 mm
Package height	145 mm
Package weight	4100 g
Impedance	4 Ω
Signal-to-Noise Ratio (SNR)	82 dB
Total Harmonic Distortion (THD)	10 %
Full-range driver diameter (imperial)	2.2 \
Bluetooth version	4.0
HDMI ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Digital audio optical in	1
FM radio	-
Display type	LED
Product color	Black
Audio formats supported	LPCM, MP3, WMA
Apple docking compatibility	Not supported
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	27 W
Subwoofer included	No

Weight and Dimensions

Depth	71 mm
Width	950 mm
Height	47 mm
Soundbar weight	2470 g