LG SK5 Simple Manual

Front Panel
1 (Standby)···········Switches the unit ON or OFF
F (Function) ·······················Selects Function
o/p (Volume) ··················· Adjusts Volume
Rear Panel
DC IN ·················· Connect to the AC adapter
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
PORTABLE IN ········ Connect to a Portable device
USB
·················· Connect to a USB device
HDMI OUT (TV ARC) ·············· Connect to a TV
HDMI IN ········· Connect to HDMI out on a device
Subwoofer Connection1
Place the wireless subwoofer near the speaker and
follow steps below.
a Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to
connect manually.
a Press Pairing button on the rear of the wireless
subwoofer.
y
The green LED on the rear of wireless
subwoofer blinks quickly. (If the green LED
does not blink, press and hold the Pairing
button.)
b Turn on the main unit.
c Pairing is completed.
y
The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
!
1 m
The buttons are located on the side.
SK5.DEUSLLK_SIM_ENG_MFL70547206.indd 2 2018-04-24  5:01:19

LG SK5 Specifications

General

Master (outer) case width	984 mm
Master (outer) case height	416 mm
Master (outer) case length	217 mm
Equalizer	Yes
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	360 W
Audio output channels	2.1 channels
Subwoofer location	Separate
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
HDMI version	1.4
Bluetooth version	4.0
Number of HDMI outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Digital audio coaxial in	-
Cables included	Optical
Subwoofer driver diameter (imperial)	6 \
Product color	Black
Audio formats supported	AAC, AAC+, FLAC, MP3, OGG, WAV, WMA
Consumer Electronics Control (CEC)	SimpLink
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	26 W
Package weight	9760 g
Tweeter diameter	20 mm
Tweeter impedance	4 Ω
Soundbar speaker RMS power	160 W
Signal-to-Noise Ratio (SNR)	82 dB

Weight and Dimensions

Depth	87.8 mm
Width	891 mm
Height	57.5 mm
Soundbar weight	2350 g
Subwoofer depth	248.5 mm
Subwoofer width	171 mm
Subwoofer height	393 mm
Subwoofer weight	5300 g