To Next Page

To Previous Page

ASC/DTS V:X/STANDARD: Selects the sound effect.

NIGHT ON/OFF: Turns down the volume at night.

WOOFER +/-: Adjusts the volume level of subwoofer.

AUTO POWER ON/OFF: Automatically turns on by an

input source.

Replacement of battery

Remote control

a Connect the sound bar to the TV using

Optical cable.

b Set up [External Speaker (Optical)] on

your TV setting menu.

TV Connection 2

Optical Connection

HDMI(ARC) Connection

a Connect the sound bar to the TV using

HDMI cable.

b Set up [External Speaker (HDMI ARC)] on

your TV setting menu.

Connect with the Sound Bar and TV using

Optical (

) or HDMI ARC ( ).

Additional Device Connection

a Connect to the external device as follows.

(Set-top Box,

Player etc.)

b Set the input source by pressing F on the remote

control or unit repeatedly.

HDMI connection is unavailable if your TV

does not support HDMI ARC.

If this unit is connected by OPTICAL and

ARC at the same time, the ARC signal is a

high priority.

SK5.DEUSLLK_SIM_ENG_MFL70547206.indd 3 2018-04-24  5:01:20

Other manuals for LG SK5

Questions and Answers:

Need help?

Do you have a question about the LG SK5 and is the answer not in the manual?

General

Master (outer) case width	984 mm
Master (outer) case height	416 mm
Master (outer) case length	217 mm
Equalizer	Yes
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	360 W
Audio output channels	2.1 channels
Subwoofer location	Separate
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
HDMI version	1.4
Bluetooth version	4.0
Number of HDMI outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Digital audio coaxial in	-
Cables included	Optical
Subwoofer driver diameter (imperial)	6 \
Product color	Black
Audio formats supported	AAC, AAC+, FLAC, MP3, OGG, WAV, WMA
Consumer Electronics Control (CEC)	SimpLink
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	26 W
Package weight	9760 g
Tweeter diameter	20 mm
Tweeter impedance	4 Ω
Soundbar speaker RMS power	160 W
Signal-to-Noise Ratio (SNR)	82 dB