To Next Page

To Previous Page

1-8

Only for training and service purposes.

1. FACTORY RESET

• Key : Press WiFi Button on the soundbar for 5 seconds.

• Result : Initialize EEPROM (MICOM) and MPEG (MAIN).

(But Wireless Woofer and Wireless Rear speakers are not)

2. SW Version Display

• Enter : Press Volume ‘-’ on Soundbar with ‘Play/Pause’ on Remocon for 5 seconds.

• Change Display : Whenever press ‘F.SKIP’ on remocon, displaying SW program is changed.

M : MICOM

PQ : PEQ

B : MAIN

D : DSP

H: HDMI

TX : WOOFER TX

RX : WOOFER RX

RT : REAR TX

RR : REAR RX

MQ : MEQ

T : TOUCH

• Result : Scroll SW Version on Soundbar VFD.

• EXIT : Press ‘Play/Pause’ on Remocon for 5 seconds.

< MICOM > < PEQ > < MAIN > < DSP >

3. OPTION Edit

• Enter : Volume ‘-’ on soundbar with ‘AV SYNC’ key on remocon for 5 seconds.

• Result : VFD display OPTION number and OPTION data like ‘’00 00” “02 4A” …

• How to Change Option data :

Change Option data by press ‘PLAY/PAUSE’ on remocon key,

change option number by press ‘B.SKIP’ on remocon, ‘F.SKIP’ on remocon after change option f nish,

press ‘AUTO VOL’ key. System will save option and restart.

4. WIRELESS WOOFER & REAR SPEAKER TX RESET

• ENTER : Press Mute key for 3 seconds when Woofer and Wireless Rear speaker is off.

• RESULT : VFD displays ‘WL RESET’’ and initialize TX module.

Paring will be disconnected.

HIDDEN KEY MODE

< MAIN Key > < Remocon >

LG SK6Y Service Manual

Other manuals for LG SK6Y