To Next PageTo Next PageWhy is my LG SN11R Speaker System remote control not working?
To resolve remote control issues with your LG Speaker System: * Ensure the remote is within 7 meters of the unit. * Remove any obstacles blocking the path between the remote and the unit. * Replace the batteries with new ones.
What to do if my LG SN11R Speaker System has no sound?
If your LG Speaker System isn't producing sound: * Check the volume level and increase it if it's set too low. * Deactivate the mute function by pressing the mute button or adjusting the volume. * Verify that you've selected the correct input source.
What to do if my LG SN11R Speaker System is not working properly?
If your LG Speaker System isn't working properly, try the following: * Turn off the power to both the unit and any connected external devices like TVs, woofers, DVD players, or amplifiers, and then turn them back on. * Disconnect the power cord from the unit and connected external devices, then reconnect them. * Be aware that previous settings might not be saved if the device power is shut off.
How to fix LG SN11R when the power does not turn on?
If the power to your LG Speaker System won't turn on, ensure the power cord is securely plugged into the outlet.
Why is Bluetooth pairing not working on my LG SN11R?
If Bluetooth pairing isn't working well on your LG Speaker System: * Make sure your Bluetooth device is turned on. * Try turning Bluetooth off and then on again on your device before attempting to pair. * Remove any obstacles between your Bluetooth device and the speaker system. * Note that pairing success can depend on the type of Bluetooth device and the surrounding environment.
Why is the AUTO POWER function not working on my LG SN11R?
If the AUTO POWER function on your LG Speaker System isn't working: * Check the connection of the external device, such as a TV or DVD/Blu-Ray player. * Check the SIMPLINK settings on your LG TV and try turning SIMPLINK off. * Note that this function may not work depending on the connected device.
What to do if the output sound of LG Speaker System is low?
If you're experiencing low output sound from your LG Speaker System, try these steps: * Switch the DRC function to OFF using the “LG Sound Bar” setting. * If connected to a TV, change the AUDIO DIGITAL OUT setting in the TV Setup Menu from PCM to AUTO or BITSTREAM. * If connected to a Player, change the AUDIO DIGITAL OUT setting in the Player Setup Menu from PCM to PRIMARY PASS-THROUGH or BITSTREAM. * Change the Audio DRC setting on the connected device's setup menu to the OFF state. * Ensure Night Time mode is off.
Why is there no woofer sound coming from my LG Speaker System?
If you're not getting any woofer sound from your LG Speaker System: * Ensure the subwoofer's power cord is securely plugged into the wall outlet. * Check if the pairing between the unit and the subwoofer has been disconnected, and if so, reconnect them.
Why is LG Sound Sync not working with my LG Speaker System?
If your LG Sound Sync isn't working, verify the following: * Confirm that your LG TV supports LG Sound Sync (Wired). * Check the connection of LG Sound Sync (Wired). * Review the sound settings on both your TV and the speaker system.
What to do if I cannot change input source with F on LG SN11R?
To resolve the issue of not being able to change the input source on your LG Speaker System when the display shows only [DEMO]: * Unplug the power cord and plug it back in. * If that doesn’t work, set the volume to 2, then press and hold the F button (for about 5 seconds) on the main unit until the display shows the currently selected function.
General| Channels | 7.1.4 |
|---|---|
| Total Power Output | 770W |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Wireless Subwoofer | Yes |
| Rear Speaker Kit | Included |
| Bluetooth | Yes |
| HDMI Input | 2 |
| HDMI Output | 1 (eARC) |
| Wi-Fi | Yes |
| Speaker Type | Soundbar |
| Chromecast Built-in | Yes |
| Apple AirPlay 2 | Yes |
| LG Sound Sync | Yes |
| Subwoofer | Wireless |
| Connectivity | Bluetooth, Wi-Fi, HDMI |
| Google Assistant | Yes |
| Weight (Soundbar) | 7.2 kg |
| Weight (Subwoofer) | 7.8 kg |
Crucial safety warnings and operating precautions for the sound bar.
Step-by-step instructions for setting up and positioning the main sound bar unit.
Connects sound bar to network using Google Home app for enhanced functions.
Steps to establish Wi-Fi connection using Google Home app and sound bar.
Details on pairing and connecting wireless subwoofer and rear speakers for surround sound.
Guides for connecting sound bar to TV via optical or HDMI cables for audio.
Detailed steps for connecting sound bar to TV using an optical cable.
Instructions for connecting sound bar to TV using HDMI for audio.
Instructions for connecting USB devices and playing media files.
Detailed steps for playing music and managing files from a connected USB device.
Guide to connecting and using Bluetooth for wireless audio streaming.
Steps for pairing and playing music from a Bluetooth-enabled device.
Procedure to reset speaker to factory defaults, clearing network information.
Solutions for common problems: no operation, no power, or no sound.
