EasyManuals Logo

LG SNC4R User Manual

LG SNC4R
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Connecting 17
Connecting
2
y
It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y
The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
- There is an obstacle between the main unit
and the subwoofer.
- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
- Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m (3.3 ft) to
prevent wireless interference.
!
1 m
(3.3 ft)
y
The wireless subwoofer (or wireless rear
speakers kit) uses the 5.8 GHz band (upper
channels 149 to 165).
So it is recommended to change the wireless
router channel to 5.2 GHz band (lower
channels 32 to 48) to avoid interference with
the wireless router.
* Refer to the wireless router manual for how
to change the wireless router channel.
,
Note
Rear speakers connection
Connecting the rear speakers
1. Connect the black stripe wire to the terminal
marked - (minus) and the other end to the
terminal marked + (plus).
2. Connect the wireless receiver and the rear
speakers (right, left) with the speaker cables.
Color Position
Grey Rear right
Blue Rear left

Other manuals for LG SNC4R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG SNC4R and is the answer not in the manual?

LG SNC4R Specifications

General IconGeneral
Audio decodersDTS Digital Surround, Dolby Digital
Equalizer modesAI Sound Pro, Bass Blast+, Movie, Standard
RMS rated power420 W
Audio output channels4.1 channels
Rear speaker RMS power120 W
Front speakers RMS power100 W
Night modeYes
Product colorBlack
Audio formats supportedLPCM, MP3, WMA
Wi-FiNo
HDMI ports quantity-
Connectivity technologyWired & Wireless
Digital audio optical in1
Subwoofer typeActive subwoofer
Subwoofer connectivityWireless
Cables includedOptical
Number of products included1 pc(s)
Soundbar power consumption23 W
Power consumption (standby)0.5 W
Subwoofer power consumption33 W
Soundbar speaker RMS power- W
Package typeBox
Package depth373.38 mm
Package width947.42 mm
Package height223.52 mm
Package weight12111 g
Weight and Dimensions IconWeight and Dimensions
Depth86.4 mm
Width891.54 mm
Height58.42 mm
Soundbar weight2358.7 g
Subwoofer depth261.6 mm
Subwoofer width172.7 mm
Subwoofer height391.2 mm
Subwoofer weight5307 g

Related product manuals