Operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down and prevent sudden increase of sound (Dolby
Digital only). This function turns on or off you press
DRC ON/OFF.
Turn off the sound temporarily
Press (Mute) to mute your unit. To cancel it, press
(Mute) again on the remote control or change the
volume level.
Auto LED Off
The LED on the unit turns off if no key is input
for 20 seconds.
Press and hold AUTO POWER ON button for about
2 seconds to turn on Auto LED Off function
(Default : ON).
To turn off this function, press and hold
AUTO POWER OFF button for 2 Seconds.
Using your TV remote control
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and
mute.
Press and hold DRC ON on the remote control for
about 2 seconds.
To turn off this function, press and hold DRC OFF
about 2 seconds.
y Supported TV brands
LG Panasonic Philips Samsung
Sharp Sony Toshiba Vizio
y Make sure that the sound output of your TV
is set to [External speaker].
y Depending on the remote control, this
function may not work well.
y This function does not work on LG TV's magic
remote control.
y This function may not work well when you
use LG Sound Sync.
,
Note
Auto power down
This unit will be off itself to save electric
consumption in the case main unit is not connected
to external device and is not used for 20 minutes.
So does this unit after six hours since Main unit has
been connected to other device using analog input.
(Ex : Portable, etc.)
How to disconnect the wireless
network connection or the wireless
device
Set up the AUTO POWER ON/OFF function to off
and turn off the unit.
To Next Page
Loading...
Need help?
General
