LG SPH2B-P User Manual

Getting Started
8
Getting Started
1
Front panel
C D E F G
BA
A Remote sensor
B F (Function)
Selects the function and input source.
p/o (Volume)
Adjusts volume level.
1 (Power)
Switches to power on or standby mode.
Precautions in using the touch buttons
y Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
y Do not press the touch buttons hard to make
it work.
- If you apply too much strength, it can be
damaged the sensor of the touch buttons.
y Touch the button that you want to work in
order to operate the function correctly.
y Be careful not to have any conductive
material such as metallic object on the touch
buttons. It can cause malfunctions.
,
Note
C OPTICAL LED
D BLUETOOTH LED
E LG TV LED
F PORTABLE LED
G Standby LED
It lights up in red on standby mode.
y You can check current function through the
LED.
y This unit turns off LED If there is no key input
for 20 seconds. To display LED, press any
button (except Power button).
y Standby LED quickly blinks when you press
any button.
y Bluetooth LED blinks when you select
Bluetooth function. if you connect
Bluetooth device, LED will turn on.
y When this unit reaches maximum or
minimum volume, Standby LED turns on for
2 seconds.
y When you press
(Mute) button, Standby
LED blinks slowly.
y Optical LED blinks twice and turns on when
LG Sound Sync (optical) function is selected.
,
Note

LG SPH2B-P Specifications

General

Brand	LG
Model	SPH2B-P
Category	Speaker System
Language	English