Operating 21
Operating
3
Sound adjustment
Setting the surround mode
This system has two pre-set surround sound fields.
You can select a desired sound mode by using each
sound mode button.
Sound effect Description
STANDARD You can enjoy optimised sound.
BASS BLAST
Reinforces the bass and
powerful sound.
y
In some of sound effect mode, some speakers,
there’s no sound or low sound. It depends on
the mode of sound and the source of audio, it
is not defective.
y
You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound le changed.
,
Note
Adjust the woofer level settings
You can adjust the sound level of subwoofer as your
preference.
Press WOOFER LEVEL
o
/
p
on the remote control
to adjust woofer level.
When the subwoofer level reaches maximum
or minimum, standby LED (Red) on the main
unit turns on for 2 seconds.
,
Note
To Next Page
Loading...
