LG StanbyME User Manual

1
M4L34
M4L10
Head
washer
AA
1X4X
Installation
Insert the stand base into the styrofoam groove as shown in the gure.
Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
A
B
C Secure the four screws.
Insérez la base du socle dans la rainure en polystyrène, comme il est illustré sur l’image.
Insérez la barre dans l’orice de la base du socle en la faisant glisser le long de la rainure, jusqu’à ce qu’elle atteigne la ligne de joint.
A
B
C Fixez les quatre vis.
>10
>22
kg
lbs
A
M4L34
4X
B
C
www.lg.com
Printed in Korea
Imprimé en Corée
User Install Guide Guide d'installation de l'utilisateur
*MFL718845032303rev00*

LG StanbyME Specifications

General

Screen Size	27 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Refresh Rate	60Hz
Aspect Ratio	16:9
Brightness	250 nits
Contrast Ratio	1000:1
Wireless	Wi-Fi, Bluetooth
Operating System	webOS
Viewing Angle	178°(H) / 178°(V)
VESA Mount	No
Connectivity	HDMI, USB-C
Battery	Built-in (up to 3 hours)
Stand	Height adjustable, swivel, tilt
Color Gamut	72% NTSC
Speakers	Yes (20W)

Summary

LG StanbyME Installation Steps

Assemble Stand Base and Bar

Assemble the stand base and bar, securing with screws.

Connect Power and Cables

Check orientation and secure the power plug and cable holder.

Mount Screen to Stand

Secure the screen to the stand by inserting hooks and tightening.

Attach Ring Cover

Align and install the ring cover onto the stand for a secure fit.

LG StanbyME Disassembly Guide

Disassemble Screen Cover

Steps to detach the screen cover and cable holder.

Detach Screen from Stand

Steps to detach the screen from the stand, including plug lock release.

Disassemble Stand Bar

Remove screws and disassemble the stand bar.