16 INSTALLATION
2 Hold both sides of the door and remove it
from the rails.
Assembling the Full Convert
Drawer
This feature is only available on some models.
1 Grasp the door on each side and lower it into
place on the rails.
2 Pull the drawer open to full extension. Lower
the basket onto the rails.
Assembling Freezer Drawers
1 Pull out both rails simultaneously, until they
are fully extended.
2 Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
• Do not hold the handle when removing or
replacing the drawer. The handle may come off,
causing personal injury.
3 Lower the door into its final position and
insert the screws in the rails on both sides.
en-us_main.book.book Page 16 Monday, February 20, 2023 9:41 AM
To Next Page
Loading...
