17INSTALLATION
ENGLISH
4 Insert the drawer into the frame, and push
the drawer back until it clicks into place.
5 Replace the ice bin(s) in the drawer. Insert the
Durabase basket in the rail assembly.
• The number of ice bins may vary depending on
the model.
Assembling the Right Refrigerator
Door
• Install the right-side door first.
1 Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
2 Fit the hinge a over the hinge lever latch b
and slot it into place. Rotate the lever c
counterclockwise to secure the hinge.
3 Connect all the wire harnesses d. Screw in
the ground wire
e.
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
Assembling the Left Refrigerator
Door
• Install the left refrigerator door after the right
door is installed.
1 Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator
door onto the middle hinge.
en-us_main.book.book Page 17 Monday, February 20, 2023 9:41 AM
To Next Page
Loading...
