Introduction
Thank you for purchasing an GoldStar high resolution monitor. It will
give you high resolution performance and convenient reliable
operation in a variety of video operating modes.
Features
The StudioWorks 77i is a 17-inch (15.9 inches viewable ) intelligent,
microprocessor based monitor compatible with most analog RGB
(Red, Green, Blue) display standards, including IBM PC
®
, PS/2
®
,
Apple
®
, Macintosh
®
, Centris
®
, Quadra
®
, and Macintosh II family. The
monitor provides crisp text and vivid color graphics with VGA, SVGA,
XGA, and VESA Ergo modes (non-interlaced), and most Macintosh
compatible color video cards when used with the appropriate adaptor.
The monitor's wide compatibility makes it possible to upgrade video
cards or software without purchasing a new monitor.
Digitally controlled auto-scanning is done with the microprocessor for
horizontal scan frequencies between 30 and 70KHz, and vertical scan
frequencies between 50 and 160Hz. The microprocessor-based
intelligence allows the monitor to operate in each frequency mode
with the precision of a fixed frequency monitor.
The microprocessor-based digital controls allow you to adjust
conveniently a variety of image controls by using the OSD (On
Screen Display).
The monitor is shipped with 12 factory pre-programmed video modes
that are permanently resident, and another 12 are set at the factory,
but may be overwritten to make more room. In addition, there are 25
user storable modes, for a total of 49 memory modes.
This monitor is capable of producing a maximum horizontal resolution
of 1280 dots and a maximum vertical resolution of 1024 lines. It is
well suited for CAD work and sophisticated windowing environments.
For low cost of monitor operation, this monitor is certified as meeting
the EPA Energy Star requirements, and utilizes the VESA Display
Power Management Signalling (DPMS) protocol for power saving
during non-use periods.
1
To Next Page
Loading...
