18
PROGRAMMING MODE
OPL type
Algorithm Flow Chart shows how to control programming mode.
Before program set, check the structure of programming mode.
OPL/Coin Type
1) Push the High Temp. and Low Temp. button at the same time.
2) Push the Med Temp. button 3 times.
3) Push the Start button.
4) Display will show
is to set price value, time value and vend type etc.
consists of line test, reset, free cycle and kill cycle.
Is to collect the usage data.
Structure of Programming mode
• Do not use , .
• It is only used in inspecting the machine.
NOTE
Do not use , without a
qualified professional.
MFL67863709_en_170328.indd 18 2017-03-28 �� 9:54:23
To Next Page
Loading...
Need help?
General
