LG TD-C70212E User Manual

Operating your dryer
12
O
perating your dryer
5.Close the Door.
Before you close the door, make sure fabrics are
well placed inside and that foreign objects,
especially flammable ones, are not caught
around door.
6.Select the Drying Cycle you want.
You can choose a cycle by turning the program
control knob until the required program reaches
to its indicator. If you only press Start/Pause
button without choosing any cycle, the dryer will
proceed with the Cupboard program.
[Please refer to following Cycle Selection table
(page 10) for the detailed information]
7.Press the Start button.
You can hear drum rotating.
8.After operation is completed, open
the door and remove the laundry.
Careful! the drum inside could be still hot.
(Operation time varies depending on your cycle
selection or options.)
9.Clean the Lint Filters and
empty water container.
The lint filter should be cleaned after each load.
10. Turn off the Dryer.
Press the ‘‘Power’’ button.
Select the
desired
Cycle.
Take out
the laundry.
Clean the
lower lint
filter.
Clean the
door lint
filter.
- Be careful not to trap laundry in between the
loading door and rubbber seal.
CAUTION
- Be careful of the fact that filter should not be
torn when using a vaccum cleaner. If there
is a little residue buildup on filter, you can
scrub lint screen with the brush to remove.
- If you want to open the door while dryer is
operating, please press the Start/Pause
button first, wait until drum completely stops
and then open the door.
CAUTION

LG TD-C70212E Specifications

General

Display type	LED
Loading type	Front-load
Product color	White
Reversible doors	Yes
Appliance placement	Freestanding
Cycle time	119 min
Drum capacity	7 kg
Number of drying programs	10
Delay start (max)	19 h
Current	16 A
Connected load	2900 W
AC input voltage	220 - 230 V
AC input frequency	50 Hz
Energy consumption	3.92 kWh

Weight and Dimensions

Depth	585 mm
Width	595 mm
Height	850 mm
Weight	40000 g