To Next Page

To Previous Page

Caring for your dryer

Change the Bulb

The bulb itself could be very hot when the dryer just

finishes its operation. So before changing the bulb,

be sure that the inside of the drum is cool down.

1. Open the door, put a hand into the drum and

grasp a bulb cover.

2. With the bulb cover held by a hand, turn it to the

clockwise with a certain amount of the force.

3. Seperate the bulb cover from the socket

housing.

4. Remove the current bulb turning it to counter

clockwise direction.

Be careful that it does not fall off.

5. Screw in the new bulb in the reverse

unscrewing direction.

6. With the bulb cover held by a hand, turn it to the

counterclockwise with a certain amount of the

force, until you listen to “click sound”

CAUTION

Power cord must be unplugged before this

work to avoid danger of electric shock.

Do not need any special tool for this work.

All steps can be done manually.

aring for your dryer

Questions and Answers:

Need help?

Do you have a question about the LG TD-C70212E and is the answer not in the manual?

LG TD-C70212E Specifications

General