To Next PageTo Next PageWhy does my LG Monitor screen retain an image?
If your LG Monitor screen retains an image, it might be due to displaying a still image for a long time, which can damage the screen. To extend the monitor's life, use a screensaver.
How to unlock features on my LG UltraGear 32GN650-B.ATID?
If some features are disabled on your LG Monitor, the OSD might be locked. To unlock it, go to Menu > General and set OSD Lock to Off.
Why is the display color abnormal on my LG UltraGear 32GN650-B.ATID?
If the display color on your LG monitor appears abnormal, first set the color to 24 bit (true color) or higher via Control Panel > Display > Menu > Color Quality in Windows. Next, check the signal cable connection, reconnecting it or reinserting the PC's graphics card. Note that some pixilated spots (red, green, blue, white, or black) are normal for LCD screens and not indicative of an error.
How to enable disabled features on LG Monitor?
If some features are disabled on your LG Monitor, the OSD might be locked. To unlock it, go to Menu > General and set OSD Lock to Off.
Why is my LG UltraGear 32GN650-B.ATID screen unstable and shaky, leaving shadow trails?
If the screen display of your LG Monitor is unstable and shaky, or if images displayed on the monitor leave shadow trails, and the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Try changing the resolution to 1080p or the recommended resolution.
Why is the display color on my LG UltraGear 32GN650-B.ATID abnormal, and how can I fix it?
If the display color on your LG Monitor is abnormal, try setting the color to 24 bit (true color) or higher. In Windows, this can be found under Control Panel > Display > Menu > Color Quality; note that the exact settings location may vary based on your operating system. Also, check if the signal cable is properly connected, and if not, reconnect the cable or reinsert the PC's graphics card. It is worth noting that pixilated spots (red, green, blue, white, or black) may appear on the screen. It is not an error, nor is it related to the monitor's performance.
What to do if some features are disabled on LG UltraGear 32GN650-B.ATID Monitor?
If some features are disabled on your LG Monitor, the OSD might be locked. To unlock it, go to Menu > General and set OSD Lock to Off.
How to fix unstable and shaky screen display with shadow trails on LG Monitor?
If your LG Monitor's screen display is unstable, shaky, or images leave shadow trails, and if the resolution is set to HDMI 1080i 60/50 Hz (interlaced), change the resolution to 1080p or the recommended resolution.
What to do if LG Monitor screen display is unstable and shaky?
If the screen display on your LG monitor is unstable or shaky, or if images leave shadow trails, and the resolution is set to HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution to resolve this issue.
Why is nothing displayed on my LG UltraGear 32GN650-B.ATID Monitor screen?
If your LG Monitor screen is blank, try these steps: First, ensure the power cord is securely plugged into the outlet. Next, verify the power cable connection and press the power button. Also, confirm that the correct input is enabled by going to Menu > Input. If the monitor is in sleep mode, move the mouse or press a key. Check that your computer is turned on. If you see a message about the signal cable, inspect the cable between the PC and monitor, and reconnect it if necessary. Finally, install the display driver from LG's website and check that your graphics card supports Plug and Play.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 2560 x 1440 (QHD) |
| Refresh Rate | 165 Hz |
| Panel Type | IPS |
| Contrast Ratio | 1000:1 |
| HDR | HDR10 |
| Ports | 2 x HDMI, 1 x DisplayPort, 1 x Headphone Out |
| Aspect Ratio | 16:9 |
| Adaptive Sync | AMD FreeSync Premium |
| Viewing Angle | 178° (H) / 178° (V) |
| VESA Mount | 100 x 100 mm |
| Brightness | 350 cd/m² |
| Color Gamut | sRGB 95% |
| Dimensions (W x H x D) | 28.1 x 20.9 x 9.6 inches |
| Response Time | 1 ms |
