LG UltraGear GP9 - Charge the Speaker

8
Charge
Charging the Battery
Thespeakerisabuilt-inbattery.Makesuretochargethebatterysufcientlybeforeuse.
a Open the back cover and plug the AC adapter into the DC IN terminal.
b Plug the power cable into the AC adapter.
c Plug the power cable connected to the AC adapter into an outlet.
a
b
c
Note
• It takes about 3.5 hours to fully charge the speaker. The charging time may differ depending on the battery
status or the speaker operation status.
• Once the battery is fully charged, you can use the speaker for about 5 hours.
- This is based on a continuous use with the volume level at 50% and the front light and sound effects off. It
may vary depending on the battery or the operation status.
> CAUTION
Make sure to use the provided AC adapter. Using a different AC adapter may result in malfunctioning, longer
chargingtimeorreaccident.
Charge