WIRING CONNECTION
11
ENGLISH
The connecting cable connected to the outdoor unit should be complied with IEC 60245 or
HD 22.4 S4 (This equipment shall be provided with a cable set complying with the national
regulation.)
If the supply cable is damaged, it must be replaced by a special cable or assembly availible
from the manufacturer of its service agent.
When the connection line between the indoor unit and out-
dooor unit is over 40 m, connect the telecommunication line
and power line separately.
CAUTION
!
Model Phase(Ø) Area(mm
2
)
UU18WC
1 0.75
UU24WC
UU30WC
UU36WC
UU49WC1
3 1
UU61WC1
10±3 mm
NORMAL CROSS-SECTIONAL AREA
To Next Page
Loading...
