LG V-CP243ND - Disassembly Procedures; Filter Cover Assembly Replacement; Body Cover Assembly Replacement

P/NO: 3828Fi5870A
DISASSEMBLY
NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power supply cord
from the wall outlet.
Filter Cover
Handle
Filter Cover
Cover Latch
Body Cover
-5-
•
Almost all of the parts of this vacuum cleaner can be
disassembled with a screw driver and each connecting
component easily fits each other.
Disassemble one by one referring to the exploded view.
• If possible, don't disassemble except for the necessary
parts. It is not necessary to disassemble the parts that
are not detailed in the exploded view.
1. Filter Cover Assembly Replacement
1) Open filter cover by pushing cover latch.
2) First, lift the filter cover
- Push the hinge side by inserting flat screw driver in gap
between hinge and filter cover.
Then the “filter cover” will be detached.
2. Body Cover Assembly Replacement
1) Remove the four screws fastening the body base.
2) Lift body cover in the direction of the arrow.
3) Strip off the lead wires from the motor & cord reel.