LG V-CP243ND - Troubleshooting Guide; Motor Not Running; Motor Buzzing

SOLUTIONCAUSE
Check the power source
CHECKING
Poor plug insertion
Power cord cut
Interior lead wire cut
Motor(stator armature) coil cut
or damaged
Poor contact carbon brush
defaced
Motor armature cut
Ball bearing defacement
Impeller hindrance
(Caused by foreign matters)
Insert again
The fuse is melt down
in the coverknife switch
Exchange the fuse
Repair or exchange
Exchange the lead wire
Exchange the motor
Exchange or repair
Poor switch contact point Exchange the switch
Exchange the motor
Exchange the motor
Remove the foreign matters
Normal
Abnormal
-7-
TROUBLE SHOOTING
1. SWITCH ON BUT MOTOR DOSE NOT RUN.
P/NO: 3828Fi5870A
2. SWITCH ON, MOTOR DOES NOT RUN BUT BUZZES.