LG V192H User Manual

18
Before Operation-DVD part
LANGUAGE
Menu Language
Select a language for the VCR and DVD’s setup menu
and information display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other:To select another language, press number
buttons then ENTER/OK to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 35). If you enter the
wrong language code, press CLEAR.
DISPLAY
TV Aspect
4:3 : Select when a standard 4:3 TV is connected.
16:9 : Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan:
Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
TV Output Select
Set this unit TV Output Select options according to the
TV connection type.
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
jacks on this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
DVD
DVD
DVD
Menu Language
Original
English
Off
Original
Disc Audio
Disc Subtitle
Disc Menu
Move Select
LANGUAGE
DISPLAY
TV Aspect
Widescreen
16 : 9
Display Mode
Move Select
TV Output Select RGB

LG V192H Specifications

General

Progressive scan output	Yes
Analog signal format system	SECAM
Video formats supported	DivX
Device type	DVD player
HDMI version	1.3
Composite video out	1
SCART ports quantity	2
Power requirements	200 - 240V
Power consumption (standby)	2 W
Power consumption (typical)	17 W

Weight and Dimensions

Depth	263 mm
Width	430 mm
Height	79 mm
Weight	4200 g