A22
Specifications
W1643C
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
AC-DC Adapter
Environmental
Conditions
Stand Base
Power cord
15.6 inches (39.6 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 39.6 cm
0.252*0.252 mm pixel pitch
Horizontal Freq. 30 - 50 kHz (Automatic)
Vertical Freq. 57 - 63 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1360 x 768 @ 60 Hz
Recommend VESA 1360 x 768 @60 Hz
DDC 2AB
On Mode
: 21 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 38.54 cm / 15.17 inches 38.54 cm / 15.17 inches
Height 32.03 cm / 12.61 inches 25.52 cm / 10.04 inches
Depth 18.30 cm / 7.20 inches 5.60 cm / 2.20 inches
Net 1.7 kg (3.97 lbs)
Tilt -5˚~ 15˚
12V 2.0A
Operating Conditions
Type ADS-24S-12 1224G*, manufactured by HONOR Electronics
or type MU24-B120200-xx, manufactured by LEADER Electronics
or type LCAP07F, manufactured by Lien Chang
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
To Next Page
Loading...
