Specifications W2252S
Display
Sync Input
Video Input
Resol
uti
on
Plug
&Pla
y
Pow
e
r
Consumption
(without speaker)
Dimensions
&W
eig
ht
Tilt
Ran
g
e
Power
Inpu
t
Environm
ental
Conditions
Stand Base
Signal
cable
Power cord
22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
22 inches viewable
0.282*0.282 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max Analog : VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 Hz
DDC2AB
On Mode
: 40W(Typ.)
Sleep Mode
≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Net 4.4 kg (9.7 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
Widt
h 51.90 cm / 20.43 inches 51.90 cm / 20.43 inches
Height 42.70 cm / 16.81 inches 39.60 cm / 15.59 inches
Dept
h 22.00 cm / 8.66 inches 7.90 cm / 3.11 inches
NOTE
Information in this document is subject to change without notice
.
A22