Specifications W1952S
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Pl
a
y
Power
Consumption
Dimensio
n
s
& Weight
Tilt Ran
ge
Power Inp
ut
Environment
al
Conditions
Stand Base
Power cor
d
19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.285*0.285 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max Analog : VESA 1440 x 900 @ 75 Hz
Recommend VESA 1440 x 900 @60 Hz
DDC2AB
On Mode
: 36W(Typ.)
Sleep Mode
≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Net 3.9 kg (8.6 lbs)
Tilt -5˚~20
˚
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Temperature 10˚C to 35
˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60
˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
Width 45.15 cm / 17.78 inches 45.15 cm / 17.78 inches
Height 38.60 cm / 15.20 inches 35.30 cm / 13.90 inches
Depth 22.00 cm / 8.66 inches 7.80 cm / 3.07 inches
A21