DSUB/DVI input
HDMI input
SETUP LANGUAGE
OSD
POSITION
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
OVERSCAN
POWER
INDICATOR
• MENU" Exit
; I Adjust
Adjust
• SET : Select another sub-menu
If the output ofthe video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for DSUB input)
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscan function to turn
on when connect AV equipment.
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
FACTORY
RESET
Restoreallfactory defaultsettings except
"LANGUAGE."
Pressthe,& ,_" buttonsto resetimmediately.
If this does not improve the screen image,restorethe factorydefault settings.
If necessary,perform thewhite balancefunction again.This functionwill be enabledonly when
the input signalis ananalog signal.
To Next Page
Loading...
