§
§
To prevent being frozen in winter
§
§
When the machine is frozen
§
§
Maintenance of the drawer
Turn off the water tap and remove the inlet
hose.
Drain water in the machine using
drain plug ( ¥L ).
12
12
34
Pour hot water (about 50¡£C)
on the faucet and
remove the inlet hose.
Submerge the separated
hose in hot water
(about 50¡£C)
Pour the hot water in the
drawer and maintain it for
10 minutes for melting
Connect the inlet hose to
the water tap and check
the drain after turning on
the water tap and
operating the washing
machine.
Pull out the drawer
slightly upward.
Wash it clearly. Insert it in its original
place.
1
2
3
To Next Page
Loading...
