Symptom Check points Solution
¥
Did you press the [ Power ]
button?
¥ Is the power plug unplugged?
¥ Is the power supply correct?
¥ Is the short-circuit breaker
turned off?
¥ Did you use more detergent
than recommended?
¥ Did you use low suds detergent
for the front loading washing
machine?
¥ Did you remove the transit
bolts?
¥ Is the washer tilted?
¥ Is the drain pump clogged with
foreign material ?
¥ Is the washer loaded with
excessive clothes?
¥ Close the water tap.
¥ Unplug the power plug.
¥ Call for service
¥ Turn it on.
¥ Plug it to power supply.
¥ Use exclusive AC220-240V
outlet with ground terminal.
¥ Turn it on.
¥ Use the recommended
amount.
¥ Use detergents for front
loading washing machines
only.
¥ Remove it.
¥ install it on the firm and
even floor and level it.
¥ Remove foreign material
from the drain filter.
¥ Remove the excessive
loads.
If the water overfill due to the abnormal water valve,
you will get Ò Ó display.
Ò Ó
is displayed if the water level sensor malfunctions.
To Next Page
Loading...
