LG WD-1457RD - Exterior and Nozzle Cleaning; Winterizing Instructions

9. DISASSEMBLY INSTRUCTIONS
󳢬 Disassemble and repair the parts after pulling out power cord from the outlet.
① Unscrew the screws on the top plate.
② The plate assembly(Top) is pulled back and
then upward to arrow direction.
③ The cover(Inner) is disassembled.
①
Pull out the drawer and unscrew 2 screws.
② Lift the side the Control Panel Assembly and pull it out
① Two screws is unscrewed.
② Push out PANEL ASSEMBLY,CONTROL after Push
the hook(
①, ② ) below.
① The PWB assembly(Display) is disconnected.
② When 7 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.
CONTROL PANEL
PLATE ASSEMBLY(TOP)
PWB ASSEMBLY
(DISPLAY)
DRAWER PANEL ASSEMBLY
1
3
2
PANEL ASSEMBLY, CONTROL
29