①①
Unscrew the 2 screws from upper of the canbinet
cover.
②②
Unscrew the screw from the pump case.
①①
Put a flat (
-
) screwdriver or putty knife into the both
sides of the pump case, and pull it out.
①①
Unscrew the screw from the lower side of the cabinet
cover.
①①
Unscrew the 2 screws from the lower of the DECO
PANEL.
①①
Two screws is unscrewed.
②②
Push out PANEL ASSEMBLY,CONTROL after Push
the hook(
①, ②
) below.